Home » Raised Floors - Technical Specifications

 

Raised Floors - Technical Specifications

 

SUPPORT STRUCTURES - CODE GHA


Structure type C0, C1, C2, T1, T2:
The structure is made up of load-bearing columns positioned in correspondence with the corners of the modular grid of the panels and any appropriate transversal sections assembled between them to obtain the necessary modularity and capacity of the floor. The design of the columns and transversal sections in galvanised steel allows the positioning of gaskets to guarantee the stability of the coupling between the structure and the panels, limiting friction between the various elements. The structure’s columns vary in height according to design requirements and allow micrometric adjustment.



RAISED FLOOR PANELS - CODE GHD HEAVY - HE


Panels 120x60, 90x45, 75x75, 60x60, 60x40, 40x40 cm - slabs 120x60, 90x45, 75x75, 60x60, 60x40, 40x40 cm:
Panel with uniform support of calcium sulphate and high-density fibres with a thickness of 34 mm. The assembly between the support and the slab is carried out after preparing the surfaces and using a suitable adhesive. The lower surface of the panel is covered with a sheet of aluminium 0.05 mm thick. The edges of the panel are made of self-extinguishing noise-proof plastic material, both for the support and the porcelain stonewear finishing slabs ........ with dimensions ......... x ........ with finish ......... (Indicate the technical features of the chosen slab). Dimensions of the panel according to the size of the finishing slabs.


RAISED FLOOR PANELS - CODE GHD LIGHT - HE


Panels 120x60, 90x45, 75x75, 60x60, 60x40, 40x40 cm - slabs 120x60, 90x45, 75x75, 60x60, 60x40, 40x40 cm:
Panel with high-density wood conglomerate support, made up of a wooden core bound with hardening resins, with a thickness of 38 mm. The assembly between the support and the slab is carried out after preparing the surfaces and using a suitable adhesive. The lower surface of the panel is covered with a sheet of aluminium 0.05 mm thick. The edges of the panel are made of self-extinguishing noise-proof plastic material, both for the support and the porcelain stonewear finishing slabs ........ with dimensions ........ x ........ with finish ......... (Indicate the technical features of the chosen slab). Dimensions of the panel according to the size of the finishing slabs.


EXTERNAL GRADE RAISED FLOOR - CODE GEO EXTE


Slabs 40x40 cm:
The structure is made up of pre-fabricated load-bearing supports, in polypropylene, positioned in correspondence with the corners of the modular grid created by the slabs.
The fixed-height supports have a drilled base in the middle, for better adaptation to the support surface and can be taken apart in portions in order to be used in the end zones. The final levelling of the floor is possible thanks to the addition of overlapping shims. The height-adjustable supports are made up of different assembled elements: screws, ring nuts, head and base. The obtainable heights are between 25 mm and 150 mm. The final levelling of the floor is possible thanks to the height adjustment of the ring nut. The raised floor is made up of fine porcelain stonewear 40x40 cm, thickness 14 mm, type ..... upper finish flamed or structured (indicate the technical features of the chosen slab).


RAISED FLOOR PANELS FOR OUTDOOR USE - CODE GHO SYSTEM


Panels: 120x60, 120x30, 60x60 cm - tiles 120x60, 120x30, 60x60 cm:
The structure is composed of prefabricated weight-bearing supports, made of polypropylene, aligned with the corners of the modular grid formed by the tiles. The supports may be fixed or adjustable, with four spacers or dividers permitting creation of the floor interspace. Supports of fixed height have a perforated base in the centre, to better adapt to the supporting surface, and may be broken down into portions for use in the terminal areas. Final levelling of the floor is made possible by the addition of overlapping thicknesses. The supports of adjustable height are made up of different elements assembled together: screw, ring, head and base. Heights of 25 to 300 mm may be obtained, and final levelling of the floor is permitted by adjustment of ring height.
Porcelain panel measuring 60x60 - 120x60 - 120x30 cm and 15 mm thick with a porcelain stoneware finish measuring ........ x ........ with finish (identify technical properties of tile chosen); the assembly of the base and the tile is permitted by preparation of the surfaces with use of an appropriate high-performance adhesive for outdoor use.
The dimensions of the substrate, calibrated on four sides, will be determined on the basis of the gauge of the finishing tiles.




Download PDF

Download all the datasheets of the flooring systems in PDF format, for printing and viewing them offline:


- Code GHD HEAVY - HE

- Code GHD LIGHT - HE

- Code GHT OUTSIDE - Type 1

- Code GHT OUTSIDE - Type 2

- Code GHT OUTSIDE - Type 3

- Code GHO SYSTEM

Welcome to Granitech

Granitech deals with design and installation of ventilated walls and raised floors. Using state-of-the art technologies Granitech develops top quality solutions for important projects in contemporary architecture.

Ventilated Facades

Ventilated walls are multi-layer construction solutions for "dry" cladding of outside walls, improving their aesthetic qualities, degree of protection and insulation.

Read more

Floating Floors

A raised floor is a flooring systems designed to meet the different needs of working areas with high concentration of plant engineering systems.

Read more

Glossary

Definitions of terms and phrases commonly used in ventilated and raised applications.

Read more